DigiPlus stock

List of contents of this article:

• 1,DigiPlus stock HP computer/HP notebook can't install GHOST system
• 2, hp HP notebook how to enter bios setting u disk startup installation system
• 3, The method of reinstalling the system of hp notebook
• 4. How to install HP notebook system | hp laptop installation system tutorial
< Li style='margin-bottom: 3px;list-style: none'>5,How to reinstall HP computer system

HP computer/HP The solution to the problem that the P notebook cannot install the GHOST system

1. Method 1: Press F10 to enter CMOS, find the Power Management Setup, and set WDRT Support to Disable D; Press F10 to save and exit.

2. When you installed GHOST, you did not install it correctly. If it is not installed to the C disk, the installation is not completed, etc.It is recommended that you manually operate GHOST and install it to disk C; your GHOST system download is incomplete, resulting in incomplete system files or data loss. It is recommended to try to download it from another system.

3. Change SATADeviceMode from AHCI to IDE; press F10 to save and modify. Usually, the computer cannot install the ghost system mainly due to the incompatibility of the hard disk mode. Through the above method, the ghost system can be installed by changing the hard disk to IDE.

How to enter the hp HP notebook to enter the bios to set up the USB disk startup installation system

1. Then come to the keyboard interface, the top row isF1-f1 finds f10 in it. If the hp notebook wants to enter the bios, you need to press f10 to enter. Start the notebook, and then keep pressing f10 until you enter the bios interface to stop pressing.

2. First, open the notebook. Make sure that the notebook is in the shutdown state, and the setting of bios should be carried out under the premise of shutdown. Then insert the USB flash drive to be started first in the USB port of the notebook. If you want to install the system, the premise is that the system program has been done in the USB flash drive.

3. First of all, we need to prepare a USB disk that has been made with the u Qiwang USB disk installation system tool and insert it into the USB interface of the computer and turn it on! After we turn on the power, when the HP (or COMPAQ) interface appears, press the F10 key continuously to enter the bios setting interface.

4. It will pop up whether to start the computer or start the USB disk boot system. Select the USB disk boot system to start the USB disk boot installation system. HP Shadow Elf notebook can enter the BIOS by directly pressing F10 by turning on the power-on button. After pressing the power-on button, press the ESC button directly continuously until the picture changes, and then press the button to enter the BIOS settings.

5. First, turn off the HP notebook, and then click the hotkey to enter the bios interface in the boot interface.

hp notebook reinstall system method

HP notebook press F2 to enter bios to set up and then reinstall the system. You can follow the steps below to install the system: put the system CD into the optical drive. Turn on the power and observe the prompts on the screen. Press F2 to set the BIOS before starting the system. Set the startup mode. This setting screen is the BIOS setting.

Step 1: Prepare the system installation media. First, you need to prepare a Windows system installation CD or USB flash drive. If your computer does not have an optical drive, you can use an external optical drive or choose to make a USB boot disk.

Method/Tutorial: In the computer's browser, find and download the Xiaobai one-click reinstall system software, select Windows 10 64-bit professional version, and click to install this system. Wait for the software to be installed, and you need to back up important information before installation. After the environment is deployed, click to restart immediately.

One way is to directly back up the driver of the computer and save it on a non-system disk. Another way is to use tools, such as Driver Genie. You can search Driver Genie on Baidu to download the universal network card version.

How to install the system on HP notebook | hp laptop installation system tutorial

How to reinstall the system on HP laptop: tools/raw materialsThe prepared system boot disk computer driver preparation. One way is to directly back up the computer's driver and save it on the non-system disk.

Open the HP laptop, enter Windows 10, click Start, and then click "Settings". 2. In the settings, click [Account]. 3. Click [Login Options] in the window. 4. Click [Change] in the window and click Open. 5. Enter the old password in the dialog box.

Step 1: Prepare the system installation media. First, you need to prepare a Windows system installation CD or USB flash drive. If your computer does not have an optical drive, you can use an external optical drive or choose to make a USB boot disk.

How to reinstall the HP computer system

1. When reinstalling the HP computer system, press ESC to call up the boot menu when starting up, some of which are F12 or F9.

2. Press F2 to enter bios for HP notebooks to set up and then reinstall the system. You can follow the steps below to install the system: put the system CD into the optical drive. Turn on the power and observe the prompts on the screen. Press F2 to set the BIOS before starting the system. Set the startup mode. This setting screen is the BIOS setting.

3. Before reinstalling the system, you need to make sure that the computer is set to start from a USB flash drive or CD instead of a hard disk. Press the F2 key to enter the BIOS setting interface when the computer is turned on. Use the arrow key to move the cursor to the "Start" tab.Select the USB flash drive or CD-ROM as the preferred boot device in the boot menu.

4. HP computer reinstall system: HP computer has a special function, that is, press the Esc key, and the startup menu will appear as shown in the figure: the function of each key has its own description. Press F9 directly to enter the selection interface of the boot device, and you can also press F10 to enter the BIOS menu for settings.

5. Software version: Xiaobai one-click reinstall system Method/tutorial: find and download Xiaobai one-click reinstall system software in the computer browser, select windows10 64-bit professional version, and click to install this system. Wait for the software to be installed, and you need to back up important information before installation. After the environment is deployed, click to restart immediately.