DigiPlus fair value

List of the catalog of this article:

• 1, What is the function of the car air grid
• 2, In front of the car What is the name of the grid
• 3, What is the car grille for?
• 4、What's wrong with the fault of the car grille partition

What is the function of the car air grid

What is the function of the car air grid? The air grid on the car is an air filter, which can remove particulate impurities in the air.

The function of the automotive air filter is to filter out the air entering the engine combustion chamber without particles and impurities to ensure that the engine air intake is clean. There is a lot of dust suspended in the air. The main component is silicon dioxide, which is a harder substance than metal. The installation of air filters can reduce the wear of parts such as cylinders, pistons and piston rings.

The function of the car air filter is to filter the air entering the car engine and ensure that the air entering is relatively pure. Air filter is a kind of filter, also known as air filter, air filter, style, etc. It is mainly used for air filtration of engineering locomotives, automobiles, agricultural locomotives, laboratories, sterile operating rooms and various precision operating rooms.

The function of the automotive air filter, commonly known as the air filter element, is to filter out dust, sand grains and other impurities suspended in the air, prevent them from entering the engine, and provide the engine with clean and sufficient air. To put it bluntly, it is like a gas mask of the engine, allowing the engine to breathe cleanly, harmlessly and smoothly.

What is the name of the grid in front of the car?

The mesh in front of the car is called the middle mesh of the car or the car grille, water tank shield, etc. Metal middle mesh (Grille) is also known as car front face, ghost face, grille and water tank shield, etc. Its main function is to ventilate the air intake of the water tank, engine, air conditioner, etc., to prevent the destruction of the internal parts of the car by foreign objects during driving, and to highlight the personality.

The mesh in front of the car is called the front grille of the car. The front grille of the car is a grid-like part of the front part of the car.The front grille of the vehicle is located between the front bumper and the front beam of the body. Because the engine hood lock needs to be arranged on the upper surface area of the front grille, the grille needs to open a hood lock to avoid through holes to avoid the hood lock.

It is called car middle net or car grille, water tank cover, etc. Metal middle mesh is also known as car front face, ghost face, grille and water tank cover, etc.

What is the car grille for?

1. The front grille of the car is a grid-like part of the front part of the car. The front grille of the vehicle is located between the front bumper and the front beam of the body. Because the engine hood lock needs to be arranged on the upper surface area of the front grille, the grille needs to open a hood lock to avoid through holes to avoid the hood lock.

2. The front grille of the car is a grid-like part of the front part of the car.The front grille of the vehicle is located between the front bumper and the front beam of the body. Because the hood lock needs to be arranged in the upper surface area of the front grille, the front grille needs to open a hood lock avoidance hole to avoid the hood lock.

3. [Pacific Automobile Network] The function of the air intake grille: protective function: protect the water tank and avoid the impact of foreign objects in the engine compartment.

4. The active air intake grille can be turned off in some cases and turned on automatically in some cases. The active air intake grille can reduce the air resistance when the car is running, quickly heat the engine, and achieve high engine efficiency. Many cars are equipped with active air intake grilles, sensors, no driver control, and fully automatic.

CarWhat's wrong with the fault of the grille partition?

[Pacific Automobile Network] Because of the rain, the grille will not open if the weather is not hot, which belongs to the shutdown state. When the vehicle passes through the puddle, the water pressure moves in the direction of the grating plate, so that the grille plate moves without computer instructions. When the grille plate moves, the grille motor moves. It does not match with the computer control system, which causes the failure.

The partition failure of the Asian Dragon grille is caused by the failure of the grille rake to catch the grille slag, the frequent start of the grille, the mismatch of the computer control system and other reasons. The details are as follows: The grill rake can't catch the slag: this situation is usually caused by the looseness of the rake, and the gap between the rake and the grid surface is too large.

Active grille failure is generally caused by three reasons. Temperature sensor failure, line failure, air intake grille damage.Use the car diagnostic computer to read the data flow of the temperature sensor and analyze whether the temperature data of the temperature sensor is consistent with the actual data to confirm the fault.