Casino Plus

List of the catalog of this article:

• 1, Is it necessary to install the engine cover?
• 2, What material should be used for automobile thermal insulation shield
• 3、Introduction to automobile exhaust pipe insulation cover exhaust pipe
• 4,Casino Plus Is there any good solution to the problem of heat insulation and sound insulation of the engine cover?
• 5、What's wrong with the yellowing of the car exhaust pipe insulation cover
• 6,Casino Plus The use of the automobile engine exhaust pipe heat insulation cover

Is it necessary to install the engine cover?

The hood needs to be installed, which is the function of the hood. The main function of the hood is to protect the engine. The working environment of the engine is generally poor, and the protective cover can protect the engine from damage to a certain extent. Some advanced engines have soundproof sponges on the indoor wall of the engine, and there are rubber strips at the opening, which can effectively reduce engine noise.

It is necessary to install the hood. The hood is at the top of the engine compartment, which is rainproof and sunshade, insulating and soundproofing. Under the hood, it plays a more layer of protection.The car engine is a device that powers the car. It is the heart of the car and determines the power, economy, stability and environmental protection of the car.

The hood must be installed, on the one hand, because the engine compartment is clean and tidy, and on the other hand, to protect some wiring harnesses in the engine compartment, and also to reduce the noise generated by the engine during operation. At present, many car manufacturers have basically installed hoods on their engines.

It is necessary to install the engine cover plate, on the one hand, to keep the engine compartment clean, and on the other hand, to protect some wiring harnesses in the engine compartment, and to reduce the noise generated by the engine during work.

The engine protective cover is installed as needed. The engine protection plate is an engine protection device designed for various models.First of all, the design is to wrap the engine with soil to prevent poor heat dissipation of the engine. The second is to prevent the uneven road surface from colliding with the engine and damaging the engine.

But on the contrary, if you usually just drive to work in the city, you don't need to install an engine baffle. Originally, the road conditions were very good, and it may be futile to add a baffle. The function of the hood: air diversion.

What material should be used for the automobile thermal insulation shield

The full-wrapped car sunscreen insulation cover is made of environmentally friendly PEVA composite aluminum film, which has good waterproof and heat insulation effects, and this material is very strong, and Compared with other car sunscreen covers, this heat shield is more practical and sturdy. Therefore, the fully wrapped car sunscreen cover is better.

PVC, single coating, double coating, nano, Lakin flame retardant, PU and other fabrics are the best fabrics to buy for car covers. The PVC material of the car cover has the functions of sun protection, dustproof, rainproof, scratchproof and flame retardant. It can be used on both sides and has a service life of more than 3 years.

It depends on your personal needs. If it is dustproof and rainproof, choose a weatherproof fabric, that is, nylon PVC.

Introduction to automobile exhaust pipe insulation cover exhaust pipe

The key material of the exhaust pipe is stainless steel, and the material of the sleeve and nozzle can be stainless steel or aluminum-plated steel.

The main material of the exhaust pipe can be stainless steel, and the fasteners and junction material can be stainless steel or aluminum steel. Car engineThe purpose of the exhaust pipe insulation cover: the characteristics of the automobile engine exhaust pipe insulation cover are excellent insulating effect and resistant to high and low temperatures (high temperature 1200, resistance to extreme cold and low temperature-70).

Car exhaust pipe is a part of the engine exhaust system. The exhaust system mainly includes exhaust manifold, exhaust pipe and silencer. Generally, the three-proof catalyst to control the emission of engine pollutants is also installed in the exhaust system. The exhaust pipe generally includes the front exhaust pipe and the rear exhaust pipe.

Is there any good solution to the problem of heat insulation and sound insulation of the engine cover?

1. Double soundproofing treatment with the vibration damping plate products under the Great White Shark can achieve a better sound insulation stop effect.

2. If you want to solve the problem fundamentally, it is to strengthen the seal and seal all doors and internal seals to make the whole car soundproof, but the condition of the car must be checked before making soundproofing. There are only faults, and the focus of sound insulation should be on the door and suitcase.

3. The third method is to install soundproofing cotton. If the seal can't solve the problem, then the car can only be equipped with soundproofing cotton.In fact, there are soundproofing cotton in many parts of the car. Its function is to block noise, but car companies do not install sound insulation cotton in all parts due to the consideration of the cost of car manufacturing.

What's wrong with the yellowing of the car exhaust pipe insulation cover

Contaminant adhesion, temperature change. Contaminant adhesion: During the driving process of the car, pollutants in the air, such as sulfides, nitrogen oxides, etc., will be attached to the exhaust pipe, resulting in yellowing. Temperature change: The temperature of the exhaust pipe will change with the working of the engine, and the change of temperature will cause the aging of the material and yellowing.

When the exhaust temperature is high, if water or dirt sticks to the exhaust pipe, it will turn yellow. If you look closely, you will find that the exhaust pipes of vehicles that often drive on suburban roads are yellower than those taught.The exhaust pipes of cars driving on urban roads are relatively red.

Analysis: When the exhaust temperature is high, water or dirt will stick to the exhaust pipe and turn yellow. If you look closely, you will find that the exhaust pipe of the vehicles that often drive on the suburban road is yellower than the teaching. The exhaust pipes of cars driving on urban roads are relatively red.

If this happens in the new car, it may be caused by the poor quality of the refueling, so it is recommended to use high-standard clean gasoline. For old cars, the accumulated carbon accumulation should be cleaned up.

Use of automobile engine exhaust pipe insulation cover

Use of automobile exhaust pipe insulation cover: Function The main function is to insulating and high temperature. This also has another benefit, which can increase the exhaust gas temperature and power.The exhaust pipe is installed between the engine exhaust manifold and the muffer, and the whole exhaust system is flexibly connected, which plays the role of damping and noise reduction, installing and extending the life of the exhaust soundproofing system.

The function of the exhaust pipe insulation sleeve is to keep warm, resist high temperature, and also improve the exhaust efficiency. It is often installed between the exhaust pipe and the silencer of the vehicle engine, thus playing the role of damping vibration and reducing noise and extending the service life of the exhaust system. The exhaust pipe insulation sleeve has the characteristics of heat preservation, heat insulation, high temperature resistance, waterproof, flame retardant and so on.

Automotive exhaust pipe insulation cover: meet the requirements of objective conditions.

As a result, the surface temperature of the exhaust pipe continues to rise. In the long run, the rubber pipeline near the exhaust pipe will slowly melt, resulting in damage to the parts. And most of the vehiclesThe trachea is located below the cab. When the engine is working for a long time, the internal temperature of the exhaust pipe is as high as 700℃, which affects the driving experience.

The function of the fireproof cover is only to extinguish Mars in the exhaust gas, so the exhaust gas discharged through the fireproof cover is the same as the direct discharge, and will not produce other toxic gases. After installing the fireproof cover, it will increase the engine exhaust resistance, reduce the engine power, and increase the fuel consumption.