Bingo Plus stock

Engine belt replacement guide: operation steps,Bingo Plus stock precautions and maintenance suggestions Engine belt is a very important component of the car engine, which is responsible for the different power of the transmission engine to the car Parts, such as generators, pumps, air conditioner compressors, etc. Therefore, if your engine belt is broken or damaged, it must be replaced as soon as possible. In this guide, we will introduce the steps, precautions and maintenance suggestions for replacing the engine belt. Step 1: Check your engine belt. Before replacing the engine belt, you need to check your engine belt. If the engine belt has any of the following conditions, please be sure to replace it: ● Cracked or broken ●Surface cracks or cracks ● Stretching or sagging ● Poor appearance or feel (hard/softening) ● After long-term use Step 2: Prepare the tools needed to replace the engine belt Some basic tools are required to replace the engine belt: ● Screwdriver ● Wrench ● Flashlight ● Gloves ● pitch wrench ● Belt changing tool/wrench Step 3: Check the position of the engine belt replacement. Before preparing to replace the engine belt, you need to know the position required to replace the belt. The position of the engine belt of each car is different. Please check the car manual to know the position of the replacement belt. Step 4: Remove the engine belt cover. Remove the belt cover from the vehicle engine, which usually requires a screwdriver or wrench. At this time, we need a flashlight to help you confirm the replacement. Step 5: Remove the belt by using a belt changer or a wrench.Please make sure that you pay attention to the direction and placement of the belt to avoid incorrect direction during installation. Step 6: Install a new engine belt. Now install the new engine belt on the engine. Make sure that the new belt is correctly placed on the engine to ensure its normal use. Step 7: Reinstall the belt and cover Plate Reinstall the new engine belt on the engine, and then reinstall the cover plate. Step 8: Start the engine and check whether the newly installed belt is normal. If everything is normal, a smoother engine sound should be heard, and there will be no malfunction or noise when the belt is running. Note: ● In the process of replacing the belt, please be sure to follow the correct manual operation procedure, otherwise the belt may be loose or improperly placed. ● Please make sure that the belt you buy is suitable for your car type and model.● When replacing the belt, please make sure that your engine has completely stopped running. ● Before replacing the engine belt, please make sure that you fully understand the whole replacement process and the necessary safety steps. Maintenance advice: ● Please make sure that you replace the engine belt every year, regardless of whether there is an obvious problem. ● For drivers who often drive, please check the looseness and wear of the belt regularly. ● If you are in the face of long-term high-speed driving or heavy load, please check the wear and damage of the belt regularly. ● Drivers who replace a new car, please first understand the maintenance advice of your car manufacturer and follow its advice for engine maintenance at any time. Summary: Replacing the engine belt may be a time-consuming and money-consuming task, but it is very important for your car maintenance and the needs of the whole car life, so it cannot be ignored.If you have any questions, it is recommended to find an experienced automotive professional to help you replace the belt. With the correct operating procedures and replacement skills, you can always maintain your car and ensure that it is in the best condition.

Contact Us
Phone：020-83484685